Produse pentru licol 5500 bitum (11)

Bitumer Flexigum PU ist eine zweikomponentige Bitumen-Polyurethan-Verbindung, die eine dauerhaft flexible und chemisch beständige Befestigungs- und Spannungsübertragungsmasse bildet. Bitumer Flexigum PU findet seinen Einsatz in: •zur dauerelastischen Befestigung der Schiene als Unterboden, •Schienenbefestigungsmasse und als Unterbodenbelag, •zur Herstellung dauerhafter und flexibler Dehnungsfugen zwischen Betonplatten und Elementen aus Stahl, •Ausfüllen der Lücken zwischen Fahrbahn und Schiene, •zum Füllen von Beton-Beton-Fugen •Verfüllen von Fugen, Lücken, Rissen und Dehnungsfugen in stark bearbeiteten Asphalt- und Betondecken (z. B. Bordsteine ​​auf Brücken), •Verfüllen von „arbeitenden“ Fugen auf Stahl- und Betonbrücken und anderen Gehwegen, die durch starke Bewegungen gekennzeichnet sind.

SILCADUR Produkte sind von der Temperaturbeständigkeit und Anwendung auf die breite Palette unserer Dämmstoffe abgestimmt. Die Qualität einer feuerfesten Auskleidung oder technischen Wärmedämmung wird ganz entscheidend von den verwendeten Mörteln, Klebstoffen, Härtern und sonstigen Hilfsmitteln bestimmt. Hochwertige Rohstoffe und passende Bindungssysteme sind Voraussetzung für die thermische Stabilität. Gute Homogenität, Haftung und Verarbeitbarkeit sind die Basis für eine kostengünstige Montage. Die SILCADUR Produkte sind frostfrei (minimal +5 °C) zu lagern und zu transportieren. Die Lagerfähigkeit geschlossener Gebinde beträgt, wenn nicht anders angegeben, sechs Monate. Angebrochene Gebinde sind vor der Weiterverarbeitung auf die Eignung zu prüfen. SILCADUR 130 Coating Verarbeitungsfertiges Coating für die Oberflächenbehandlung von Faserprodukten, dessen cremige Konsistenz ein Auftragen mit Bürste oder Pinsel erlaubt. Die Wasserzugabe beträgt maximal 5%.

Si 25 lt. | Ordine minimo 100 lt. Se cerchi un detergente liquido concentrato che pulisca a fondo la tua biancheria senza rovinarla, questo è il prodotto che fa per te. Grazie alla sua formula a pH neutro, è in grado di eliminare lo sporco, anche quello più ostinato, a basse temperature, risparmiando energia e salvaguardando l’ambiente. Inoltre, mantiene i tuoi capi sempre morbidi e brillanti, senza sbiadire i colori. È perfetto per sporchi leggeri o medi e per impianti automatici. Provalo e non te ne pentirai!

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

El adsorbente Nedex 'Zeolan-K' es una mezcla de zeolitas sintéticas 3A y aglutinantes naturales. Los productos están diseñados para un proceso de adsorción de agua estática con una velocidad de adsorción muy baja. Con una densidad optimizada pueden alcanzar muy buena capacidad de adsorción de agua en un volumen específico. No tienen reacciones químicas con el aluminio, el acero, el acero galvanizado y los plásticos. ZEOLAN-K es un adsorbente para unidades de vidrio aislante con especificaciones según EN 1279:2018. Características: Valores de desorción de gas muy bajos. Alta capacidad de adsorción de agua. Granulación sin partículas rotas y Bajos valores electrostáticos y cero contenido de polvo.

Neutral vernetzendes Dichtungsmittel auf Silikonbasis. DOWSIL™ 791, witterungsbeständige Silicon-Dichtungsmasse, ist ein einkomponentiger, neutral vernetzender Silicondichtstoff mit niedrigem Modul, der besonders gut für die Wetterabdichtung und Verglasungen von Baufassaden geeignet ist. Ideal für Dehnungs-, Anschluss und andere Bewegungsfugen. Verpackung in 310ml Kartuschen, 600ml Folienbeutel

BUBBLE FLUID FLUO/UV RTU - 10L - Bubbles Référence:BUBBLEFLUIDFLUORTU10L

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth. Packaging:5L metal containers and 1000 L mauser

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

NEDEX Isolierglas Sekundärdichtstoff KU-83 ist ein 2-komponentiger, lösungsmittelfreier Kleb-/Dichtstoff mit SH-Aktivenden (Polysulfit).Die rheologischen Eigenschaften des Produkts machen es für die manuelle und Roboterverarbeitung geeignet.KU-83 haftet ohne Grundierung auf Glas, Aluminium, verzinktem Stahl und Edelstahl.Für andere Produkte, wie z. B. beschichtetes Glas, entschichtetes Glas, behandelte Abstandhalterprofile oder Profile aus anderen Materialien;entsprechende Versuche müssen durchgeführt werden, um die Eignung des Produkts sicherzustellen.Die Verwendung mit Polycarbonat oder Polymethylmethacrylat (PMMA) wird nicht empfohlen. Es wird nur für die Isolierglasherstellung hergestellt. Sehr niedrige Gas- und Feuchtigkeitspenetrationsraten Hohe Haftung auf Aluminium- und Glasoberflächen Lange Topfzeiten und Kurze Aushärtezeiten Verpackung: Box-Kit (15lt A + 1,5lt B / 16,5lt A + 1,8lt B) Fass-Kit (55lt A + 6lt B / 160lt A + 16lt B / 182lt A + 18lt B / 190lt A + 19lt B)